BaoFeng BF-F8HP first glance review at a CERT Training event.
EDIT 8/29/2015 as you can see in the comments and via emails a few folks have asked about the Scam link from Beofeng Tech not working Well I have found a archived page link here
http://web.archive.org/web/20150320174037/https://baofengtech.com/BF-F9v2+
EDIT 7/7/2015: The link below(BF-F9v2+ Scam) is no longer functional I inquired about this from Baofengtec and this is the response
Whats different from the BF-F9v2+: The BF-F9 v2+ has firmware that is older than our current BF-F8HP firmware. In many cases we have rejected batches of firmware – which will get put into different radios “clones” at lower prices. The BF-F9 v2+ is always imported by sea and not air – so by the time it even hits the market for re-sell it is already MONTHS outdated. — The BF-F9 v2+ does not include the high gain antenna, but comes with the UV-5R antenna. — The BF-F9 v2+ has a small 1500mAh battery (our battery is 30% larger) — It does not always include the earpiece for quick communication. — The BF-F9 v2+ includes the old original manual – and does not include our full manual (which is 3 times larger) for operating your new radio.
I was just about ready to buy a pair of the inexpensive China HT UV-5R+ last October from Amazon when I noticed that BF-F8HP was available and according to the marketing drivel it was boosting 8 watts out!
( A quick note on the BF-F9 v2+ scam at the end of this article)
While the F8 was about 2X the price of the 5R, the extra power out intrigued me. You know HAMs, we have got to have the latest and greatest. So I sprung for 2 off of Amazon for $62.89 each plus some accessories.
The radios arrived in 2 days due to my Amazon Prime account and unboxing began. The radio seemed well made or as well made as anything fresh and new without any testing.
The manual was great looking, but after trying to dig through it, I realized that is was the typical Chinese translation only in a flashy package. It’s enough to get you familiar with the radio, but leaves a lot to be desired.
Manual programing is not too difficult once you get the process down. The manual is not bad for programing help and if necessary there are a few good YouTube videos out there to walk you through it as well.
As usual with the BaoFeng radios, the free CHIRP software is available to program the radio. When you buy any of the BaoFeng radios you will need to buy a programing cable and download the CHRIP software as the radio needs to be initialized before use. You actually have to read/download data from the radio to the computer before you can program it.
When buying the programing cable be sure to buy the BaoFeng cable not a cheap knockoff. Most all issues with these radios/CHIRP comes from using a knockoff cable with a bad chipset. I spent $20 on the cable and never had a problem except for trying to force CHIRP to accept the same data from my fields in the RT Systems software I use for the old standby Yaesu FT-60. More about that later.
I tried to export from the RT Systems software(I use to program some of my other radios) to Excel and then importing that into the CHRIP program and had a hell of a time. That’s where the intrepid Chirp User Group came to the rescue. http://intrepid.danplanet.com/mailman/listinfo/chirp_users
I posted the issue I was having transferring data between RT and CHIRP and one of the members told me to send him the file I was trying to import and he would look at it. I did and about a day later “Jim” sent me a new set of files that I could compare. DUH! It was obvious what I was doing wrong. Here are screen shots of the RT Systems screens vs the Chrip Screens for the same files(with some minor order changes)
Above is the RT Systems Software screen shot. It has the station lables and comments off to the right.
Below is the CHIRP screen shot
I imported the file into CHRIP and Uploaded to the radio and everything was right with the world or at least my new radio. Fired it up and started hitting the local repeaters without issue.
When I bought the radio I also bought the following upgrades:
Genuine Nagoya NA-771 (Updated) SMA Female 15.6″ Dual Band Antenna (144/430Mhz) $16.99
UV-5R Series Battery Eliminator with DC Adapter(car) $14.89
BL-5 AA (6 AA Battery) Battery with Dummy Battery for BaoFeng UV-5R and BF-F8HP Series $15.69
Tram 1185 Amateur Dual-Band Magnet Antenna $16.00
Genuine FTDI BaoFeng Programming Cable $20.96
Total for one set was $156.96 plus tax because in AZ, Amazon has a distribution center here. The nice thing about them being in my back yard, on most items that Amazon sells, I do have the option of ordering in the morning and having it delivered to my door by that evening. Dangerous!
The first real use of the F8HP was last weekend during a Chandler CERT training event where our team provided comms for each of the walking teams handing our drowning prevention flyers. http://www.chandleraz.gov/newsrelease.aspx?N_UID=3032
Now the flyer hangers did not need us, but it gave the CERT Comm Team a chance to practice deployed communications with a remote Network Command Center using go boxes instead of using the Chandler City Emergency Command Center Comm Room. We had 6 Chandler CERT Comms guys along with 2 Phoenix CERT Comms guys who came over to lend a hand.
The remote network command station was set up in an outdoor park with 2 ea Diamond X50 antennas on tripods. 2 “Go Boxes” with radios/batteries/Solar panels and other gear rounded out the equipment.
We have a City of Chandler Repeater that is our normal CERT16 unit, along with a secondary City repeater at the Chandler Hospital. We also establish a “Simplex” channel in case the repeaters went down(Back Up Plan). Here is a copy of our ICS-205 Incident Radio Communications Plan that we used for this event.
Walking with the swim teams hanger flyers each RADO would report in locations, rogue dogs(1 reported), injuries(did not have any) and anything else that was required like needing more flyers or water for the walkers.
I have to say the F8 was the hit of the day. All of my comms even on simplex were loud and clear while some of the guys using the $350 Yaesu radios were less than stellar as far as power and clearity. Some of that was due to poor antenna selection or location, but I think a lot was due to the extra few watts of power out.
All in all I am happy with the F8, but there is way more field testing needed to give it a trusted place in my go bag. One big gripe from me is that it only has 128 memories. That is where the FT-60 shines with its 1000 memory slots.
It can monitor(and transmit) all FRS, GMRS, Marine band and Business Channels although transmitting on some of these is not legal even with an amateur radio license. YMMV
Details:
What’s Included in the box?
Every BF-F8HP Kit Comes With
• BF-F8HP
• 2000mAh Battery
• Antenna
• Power Adapter
• Earpiece
• Belt Clip
• Hand Strap
• Battery Charger
• User Manual
BF-F8HP Product Details
25KHz/12.5KHz Switchable (Wide/Narrow Band)
FM Radio (65.0MHz-108.0MHz)
Large Tri-color LCD Display
LED Flashlight
High / Medium / Low RX Power Selectable
VOX – Voice Activated Transmissions
50 CTCSS/ 104DCS coder & tone searching
Dual standby & Dual Watch
PC Programmable
Wide/Narrow Band (25kHz/12.5kHz)
Transmitter time-out timer(TOT)
High / Medium / Low TX power selectable
Busy channel lock-out(BCLO)
Specifications
BF-F8HP:
Frequency Range: 65-108MHz (FM Receive only), 136-174MHZ, 400-520MHZ
Channel No: 128
Stability: ±2.5ppm
Antenna: High Gain, Dual Band
Antenna Impedance: 50Ω
Operating Voltage: DC 7.4V
Modes: Simplex or semi-duplex
Antenna: SMA-Female
Accessory Plug: Kenwood
Weight: 250g(including battery, antenna)
Power adapter: Input: AC100V, 50-60Hz;
Output: DC10V/500mA;
Plug Type: US
Output power: 8W / 5W / 1W (Max 8W)
Modulation Mode: 16kΦF3E / 11kΦF3E
Maximum deviation: 5kHz(Wide) / 2.5kHz(Narrow)
Spurious Radiation: 7μW
Current: ≤1.6A(5W)
CTCSS/DCS deviation: 0.5±0.1kHz(Wide) 0.3±0.1kHz(Narrow)
Intermediation sensitivity: 8-12mv
Intermediation distortion: ≤10%
Pros:
Power out
Good selection of accessories at attractive pricing levels compared to the big boys
CHIRP programing software is free and plenty of help on the net for helping with that
Dual watch/Standby
Great Pricing levels
Monitor(& Transmit capable legal or not) on all FRS, GMRS, Business, Marine bands
Cons:
128 Memory Channels
untested longevity
Just an OK manual
Slow Memory Scanning
The BF-F9 SCAM
EDIT 7/7/2015: The link below(BF-F9v2+ Scam) is no longer functional I inquired about this from Baofengtec and this is the response
Whats different from the BF-F9v2+: The BF-F9 v2+ has firmware that is older than our current BF-F8HP firmware. In many cases we have rejected batches of firmware – which will get put into different radios “clones” at lower prices. The BF-F9 v2+ is always imported by sea and not air – so by the time it even hits the market for re-sell it is already MONTHS outdated. — The BF-F9 v2+ does not include the high gain antenna, but comes with the UV-5R antenna. — The BF-F9 v2+ has a small 1500mAh battery (our battery is 30% larger) — It does not always include the earpiece for quick communication. — The BF-F9 v2+ includes the old original manual – and does not include our full manual (which is 3 times larger) for operating your new radio.
One word of warning, there is a BF-F9 v@+ available out there, but according to the BaoFeng website is NOT an upgrade, but a vendor adding a new designation hoping to have people think it was a newer model. It is the same unit except it does not come with a high gain antenna(it has the UV-5R antenna) and has the 1500mAh battery not the larger 2000 mAh battery the F8plus come with. It also does not have an ear piece. Read more here https://baofengtech.com/BF-F9v2+