My Community

Radio => Transceivers => Topic started by: spacecase0 on April 10, 2018, 10:02:50 PM

Title: Yaesu VX-7R DC voltage calibration
Post by: spacecase0 on April 10, 2018, 10:02:50 PM
so I have a Yaesu VX-7R that has the DC voltage display about 0.3V below the actual voltage,
it use to work perfect, but a few years ago I went into some service menu sort of thing and it recalibrated itself because the battery voltage was not 8.3V when I did it.
(guess it could have been a dream I remember, but I am pretty sure it actually happened)

I have been trying to figure out where that menu is but can't find it,
it is not in the standard service menu where you can change the power levels, S meter calibration, and things like that,
does anyone know where that menu is ? I have searched everything I can find on the web and just can't find it.
Title: Re: Yaesu VX-7R DC voltage calibration
Post by: AD on April 11, 2018, 07:54:24 PM
I will see if I can find something on it. 
Title: Re: Yaesu VX-7R DC voltage calibration
Post by: Tevin on April 12, 2018, 06:01:35 PM
I will see if I can find something on it.

I did a quick google and could not find any mention of this issue.

If you find anything please post it because I'm curious myself.
Title: Re: Yaesu VX-7R DC voltage calibration
Post by: AD on April 12, 2018, 06:15:05 PM
I read through the service manual and the owners manual and did not find anything specificly on the the adjusting of the battery voltage offset.

I will kepp looking.
Title: Re: Yaesu VX-7R DC voltage calibration
Post by: spacecase0 on April 12, 2018, 09:32:25 PM
I read everything I could and could not find it
could be that it is not a changeable setting
I even put mine in european mode to see if its service menu had it then...
tried about everything I could think of.
the altimeter is correct, as well as the temperature, so it would appear not to be a reference voltage issue
could be I just have to live with this thing being broken.
maybe a sticker on the back with a quick reference offset table...
Title: Re: Yaesu VX-7R DC voltage calibration
Post by: ghrit on April 12, 2018, 10:29:13 PM
Did you try a complete reset to default factory settings?  (I've cured a couple problems that way, start over from scratch.)
Title: Re: Yaesu VX-7R DC voltage calibration
Post by: spacecase0 on April 13, 2018, 11:46:05 AM
yes, tried that twice. was actually the first thing I tried.